C1-N5548UP-B-S32 Cisco ONE Nexus 5000 Switch (New)

Cisco

Write a Review
$18,723.00
SKU:
C1-N5548UP-B-S32
Adding to cart… The item has been added

Product Overview

Condition: NEW
Availability: End Of Life - Inventory May Be Limited
Last Day Of Support: May 31, 2024

Cisco ONE Nexus 5548UP Switch - Storage Solutions Bundle - managed - 32 x SFP+ - rack-mountable (C1-N5548UP-B-S32)

The Cisco Nexus 5000 Series is designed for data center environments with cut-through technology that enables consistent low-latency Ethernet solutions, with front-to-back or back-to-front cooling, and with data ports in the rear, bringing switching into close proximity with servers and making cable runs short and simple. The switch series is highly serviceable, with redundant, hot-pluggable power supplies and fan modules. It uses data center-class Cisco NX-OS Software for high reliability and ease of management.

Device Type Switch - 32 ports - managed
Enclosure Type Rack-mountable 1U
Subtype 10 Gigabit Ethernet
Ports 32 x SFP+
Performance Forwarding performance: 960 Gbps
MAC Address Table Size 32K entries
Jumbo Frame Support 9216 bytes
Remote Management Protocol SNMP 1, SNMP 2, RMON, Telnet, SNMP 3, SSH-2, CLI
Encryption Algorithm AES
Authentication Method RADIUS, TACACS+, MS-CHAP, Secure Shell v.2 (SSH2)
Features Layer 2 switching, ARP support, VLAN support, Syslog support, Weighted Round Robin (WRR) queuing, Broadcast Storm Control, Multicast Storm Control, Unicast Storm Control, Multiple Spanning Tree Protocol (MSTP) support, DHCP snooping, Access Control List (ACL) support, Quality of Service (QoS), Jumbo Frames support, Rapid Per-VLAN Spanning Tree Plus (PVRST+), Link Aggregation Control Protocol (LACP)
Compliant Standards IEEE 802.3, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.3ae, IEEE 802.1s, IEEE 801.1p
Interfaces 32 x SFP+ ¦ 1 x 1000Base-T RJ-45 management ¦ 1 x console management
Expansion Slots 1 (total) / 1 (free) x expansion slot
Power Device Internal power supply - hot-plug
Installed Qty 2
Power Redundancy Yes
Power Redundancy Scheme 1+1
Voltage Required AC 120/230 V (50/60 Hz)
Power Consumption Operational 600 Watt
Compliant Standards CISPR 22 Class A, BSMI CNS 13438 Class A, CISPR 24, EN 61000-3-2, EN 61000-3-3, EN55024, EN55022 Class A, AS/NZS 60950-1, ICES-003 Class A, RoHS, FCC CFR47 Part 15, UL 60950-1 Second Edition, GB 4943, FIPS 140-2 Level 1, Directive 2004/108/EC, CSA C22.2 No. 60950-1 Second Edition, EN 60950-1 Second Edition, IEC 60950-1 Second Edition, Directive 2006/95/EC, VCCI Class A, KN22 Class A, EN 300386
Width 17.3 in
Depth 29.5 in
Height 1.7 in
Weight 35.01 lbs
Min Operating Temperature 32 °F
Max Operating Temperature 104 °F
Humidity Range Operating 5 - 95% (non-condensing)
Min Storage Temperature -40 °F
Max Storage Temperature 158 °F