Product Overview
Condition: NEW
Availability: End Of Life - Inventory May Be Limited
Last Day Of Support: April 30, 2022
Cisco ONE Nexus 6001 Switch - L3 - managed - 48 x 10 Gigabit SFP+ + 4 x 40 Gigabit QSFP+ - AC 100/230 V - rack-mountable (C1-N6001-64T)
The Cisco Nexus 6001 series Switch is a wire-rate Layer 2 and Layer 3, 48-port 10 Gigibit Ethernet (GE) switch with 40 GE uplinks. It is optimized for high-performance, top-of-rack 10 GE server access and Cisco Fabric Extender (FEX) aggregation. The switch delivers high performance, operational efficiency, and design flexibility for traditional, virtualized, and cloud environments.
| Device Type | Switch - L3 - managed |
| Enclosure Type | Rack-mountable 1U |
| Subtype | 10 Gigabit Ethernet |
| Ports | 48 x 10 Gigabit SFP+ + 4 x 40 Gigabit QSFP+ |
| Performance | Forwarding performance: 1.28 Tbps |
| Capacity | Virtual interfaces (VLANs): 4096 ¦ ACL: 4000 ¦ IPv4 routes: 8000 ¦ IGMP groups: 8000 |
| MAC Address Table Size | 256K entries |
| Jumbo Frame Support | 9216 bytes |
| Routing Protocol | RIP-2, BGP, EIGRP, IGMPv2, HSRP, VRRP, OSPFv2, PIM-SM, IGMPv3, EIGRP for IPv6, OSPFv3, MSDP, static IPv4 routing, static IPv6 routing |
| Remote Management Protocol | SNMP 1, SNMP 2, RMON, Telnet, SNMP 3, SSH-2, CLI |
| Authentication Method | RADIUS, TACACS+ |
| Features | VLAN support, Broadcast Storm Control, Multicast Storm Control, Unicast Storm Control, Multiple Spanning Tree Protocol (MSTP) support, Access Control List (ACL) support, Quality of Service (QoS), RADIUS support, Equal-Cost Multipath (ECMP), Rapid Per-VLAN Spanning Tree Plus (PVRST+), DHCP relay, Link Aggregation Control Protocol (LACP), Hot Standby Router Protocol (HSRP) support, Virtual Routing and Forwarding (VRF) |
| Compliant Standards | IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.3ae, IEEE 802.1s, IEEE 802.1Qbb, IEEE 802.1Qaz |
| Interfaces | 4 x 40Gbit LAN QSFP+ ¦ 48 x 10Gbit LAN SFP+ ¦ 1 x management |
| Power Device | Internal power supply - hot-plug |
| Installed Qty | 2 (installed) / 2 (max) |
| Power Redundancy | Yes |
| Power Redundancy Scheme | 1+1 |
| Voltage Required | AC 100/230 V (50/60 Hz) |
| Features | Front-to-rear airflow |
| Compliant Standards | CISPR 22 Class A, BSMI CNS 13438 Class A, CISPR 24, EN 61000-3-2, EN 61000-3-3, EN55024, EN55022 Class A, AS/NZS 60950-1, ICES-003 Class A, RoHS, FCC CFR47 Part 15, EN300-386, UL 60950-1 Second Edition, GB 4943, CSA C22.2 No. 60950-1 Second Edition, EN 60950-1 Second Edition, IEC 60950-1 Second Edition, VCCI Class A |
| Width | 17.3 in |
| Depth | 30 in |
| Height | 1.7 in |
| Weight | 31.99 lbs |
| Min Operating Temperature | 32 °F |
| Max Operating Temperature | 104 °F |
| Humidity Range Operating | 5 - 95% (non-condensing) |
| Min Storage Temperature | -40 °F |
| Max Storage Temperature | 158 °F |
