C1-X45-SUP8L-E/2 Cisco ONE Supervisor Engine Module (New)
SKU C1-X45-SUP8L-E/2
Condition: NEW
Availability: Stock Available
Cisco One Supervisor Engine 8L-E - Redundant - Control processor - plug-in module (C1-X45-SUP8L-E/2)
The Cisco Catalyst 4500E Supervisor Engine 8L-E is an enterprise-class campus access and price/performance aggregation supervisor engine designed to provide up to 560 Gbps per system with E-series chassis. The Cisco Catalyst 4500E Supervisor Engine 8L-E provides 48 Gbps per slot with best in class features such as Flexible NetFlow (FNF), integrated Wireshark, TrustSec and MACSec security, and APIC-EM orchestration leading to reduced total cost of ownership (TCO) and industry-leading investment protection. These capabilities, along with four SFP/SFP+ uplinks and up to 240 Gigabit Ethernet Power over Ethernet (PoE), PoE Plus (PoEP), and Cisco Universal PoE (UPoE) ports, make this supervisor engine the leading Cisco Access low-scale supervisor engine in the Cisco Catalyst Family. The Supervisor Engine 8L-E is also built with price-performance aggregation deployments in mind, helping to enable denser Gigabit Ethernet and 10 Gigabit Ethernet fiber deployments with enterprise-class aggregation functions. The Supervisor Engine 8L-E facilitates user experiences for enterprise, public sector, midmarket, and commercial customer business-critical applications.
Cisco leadership in borderless networks is extended with important features: Cisco TrustSec, Cisco MultiGig, Flexible NetFlow, Cisco EnergyWise, Cisco UPoE, and many other feature enhancements offered by the Cisco Catalyst 4500E Supervisor Engine 8L-E. Backward and forward compatibility with most existing Cisco Catalyst 4500E line cards and power supplies helps assure deeper customer satisfaction with an industry-leading investment protection architecture. The Cisco Catalyst Supervisor Engine 8L-E is supported in Cisco Catalyst 4500 E-Series chassis.
General |
Control processor |
6.48 lbs |
|
Processor / Memory / Storage |
1 x 1.8 GHz |
4 GB SDRAM |
2 GB |
|
Networking |
Plug-in module |
Wired |
RMON 1, RMON 2 |
Switching capacity: 560 Gbps ¦ Per-slot switching capacity: 48 Gbps ¦ Layer 2 bridging: 225 Mpps ¦ IPv4 routing: 225 Mpps ¦ IPv6 routing: 110 Mpps |
Flexible NetFlow entries: 128000 ¦ IPv4 routing table entries: 64000 ¦ IPv6 routing table entries: 32000 ¦ Queues per port: 8 ¦ QoS hardware entries: 64000 ¦ DHCP snooping entries: 12000 ¦ MAC addresses: 55000 ¦ Active VLANs: 4094 ¦ ARP entries: 47000 ¦ Spanning Tree Protocol instances: 12000 ¦ Switched virtual interfaces (SVIs): 4094 ¦ SPAN bidirectional sessions: 8 |
VLAN support, IPv6 support, Non-Stop Forwarding (NSF), Stateful switchover (SSO), Virtual Route Redundancy Protocol (VRRP) support, Access Control List (ACL) support, Quality of Service (QoS), PoE+, IPv4 support, Hot Standby Router Protocol (HSRP) support, Energy Efficient Ethernet, Virtual Routing and Forwarding (VRF), universal power over Ethernet (UPOE), Flexible NetFlow (FNF), 802.1x authentication, MACsec support, In-Service Software Upgrade (ISSU), Virtual Switching System (VSS), integrated Wireshark, TrustSec support, Field Programmable Gate Array, dynamic hardware route table allocations |
IEEE 802.3, IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.3ae, IEEE 802.1s, IEEE 802.3az |
|
Communications |
|
Expansion / Connectivity |
1 x 1000Base-T (management) - RJ-45 ¦ 1 x console - RJ-45 ¦ 1 x USB - Type A ¦ 1 x USB - Type B ¦ 4 x 10GBase-SX - SFP+ |
|
Miscellaneous |
491,750 hours |
Plug and Play, CISPR 22 Class A, CISPR 24, EN55024, EN55022 Class A, AS/NZS 60950-1, ICES-003 Class A, UL 60950-1, IEC 60950-1, EN 60950-1, RoHS, CAN/CSA C22.2 No. 60950-1, GR-1089-CORE, VCCI Class A, KN24, GR-63-CORE, KN22 Class A, EN 300386, AS/NZS CISPR 22, EN61000-3-2, EN61000-3-3, FCC CFR47 Part 15 A, ETS 300 019-2-1 Class 1.2, ETS 300 019-2-2 Class 2.3, ETS 300 019-2-3 Class 3.2 |
|
Power |
|
Environmental Parameters |
32 °F |
104 °F |
10 - 90% (non-condensing) |
|