Skip to content
Always New, Never Been Used Products ... Free Ground Shipping On Orders Over $500
Always New, Never Been Used Products ... Free Ground Shipping On Orders Over $500
WS-C4948-10GE-S Cisco Catalyst 4948 Network Switch (New)
WS-C4948-10GE-S Cisco Catalyst 4948 Network Switch (New)

WS-C4948-10GE-S Cisco Catalyst 4948 Network Switch (New)

by Cisco
$3,973.00
SKU WS-C4948-10GE-S

Condition: NEW

Availability: Inventory Available - But May Be Limited

Cisco 4948 Ethernet Switch - 48 port switch - 48 x 10/100/1000Base-T, Standard Multilayer Image (SMI), one AC power supply, fan tray (WS-C4948-10GE-S)

The Cisco Catalyst 4948-10GE delivers wire-speed throughput with low latency for data-intensive applications using a 136-Gbps switching fabric with a 102-million packets per second (mpps) forwarding rate in hardware for Layer 2-4 traffic. High-performance switching is delivered regardless of the number of route entries or Layer 3 and 4 services enabled. Hardware-based Cisco Express Forwarding routing architecture allows for increased scalability and performance. X2 10 Gigabit Ethernet optics provide 20 Gigabit Ethernet wire-speed uplinks for maximum throughput of traffic.

General
Device Type Switch - 48 ports - L4 - managed
Enclosure Type Rack-mountable 1U
Subtype Gigabit Ethernet
Ports 48 x 10/100/1000 + 2 x X2
Routing Protocol RIP-1, RIP-2, EIGRP, static IP routing
Remote Management Protocol SNMP 1, SNMP 2, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, HTTPS
Authentication Method Secure Shell (SSH), RADIUS, TACACS+, Secure Shell v.2 (SSH2)
Features Layer 4 switching, layer 3 switching, layer 2 switching, auto-sensing per device, DHCP support, auto-negotiation, BOOTP support, ARP support, trunking, Cisco Fast EtherChannel, VLAN support, Cisco Gigabit EtherChannel, IGMP snooping, Broadcast Storm Control
Compliant Standards IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s
Processor 1: 666 MHz
RAM 256 MB SDRAM
Status Indicators Link OK, status, link/activity
Expansion / Connectivity
Interfaces 1 x console RJ-45 management ¦ 1 x 100Base-TX RJ-45 management ¦ 48 x 1000Base-T RJ-45 ¦ 2 x X2
Power
Power Device Internal power supply - hot-plug
Installed Qty 1 (installed) / 2 (max)
Power Redundancy Yes
Voltage Required AC 120/230 V (50/60 Hz)
Miscellaneous
Compliant Standards NEBS level 3, FCC Class A certified, ETSI, CISPR 22 Class A, EN 60950, EN 61000-3-2, VCCI Class A ITE, IEC 60950, EN 61000-3-3, EN55024, EN55022 Class A, UL 60950, AS/NZ 3548 Class A, FCC Part 15, ICES-003 Class A
Software / System Requirements
Software Included Standard Multilayer Software Image (SMI)
Dimensions and Weight
Width 17.3 in
Depth 16.1 in
Height 1.7 in
Weight 16.53 lbs
Environmental Parameters
Min Operating Temperature 32 °F
Max Operating Temperature 104 °F
Humidity Range Operating 10 - 90%