Product Overview
Condition: NEW
Availability: Inventory Available - But May Be Limited
Cisco 2960 Plus Ethernet Switch - 48 ports - 48 x 10/100 + 2 x combo Gigabit SFP - rack-mountable (WS-C2960+48TC-L)
The Cisco Catalyst 2960-Plus series switches are fixed-configuration Fast Ethernet switches that provide enterprise-class Layer 2 switching for branch offices, conventional workspaces, and infrastructure applications. They enable reliable and secure operations with lower total cost of ownership through a range of Cisco IOS software features, including Cisco Catalyst SmartOperations.
| Device Type | Switch - 48 ports - managed |
| Enclosure Type | Rack-mountable 1U |
| Subtype | Fast Ethernet |
| Ports | 48 x 10/100 + 2 x combo Gigabit SFP |
| Performance | Switching capacity: 16 Gbps ¦ Forwarding performance (64-byte packet size): 10.1 Mpps |
| Capacity | Active VLANs: 255 |
| Jumbo Frame Support | 9018 bytes |
| Remote Management Protocol | SNMP 1, RMON 1, RMON 2, Telnet, SNMP 3, SNMP 2c, CLI |
| Authentication Method | RADIUS, TACACS+ |
| Features | Full duplex capability, BOOTP support, ARP support, VLAN support, Syslog support, DiffServ support, IPv6 support, Spanning Tree Protocol (STP) support, Rapid Spanning Tree Protocol (RSTP) support, Multiple Spanning Tree Protocol (MSTP) support, DHCP snooping, Port Aggregation Protocol (PAgP) support, Trivial File Transfer Protocol (TFTP) support, Quality of Service (QoS), Dynamic ARP Inspection (DAI), Cisco EnergyWise technology, Shaped Round Robin (SRR), LLDP support, DHCP relay, Link Aggregation Control Protocol (LACP), MAC Address Notification, Management Information Base (MIB), Class of Service (CoS), DiffServ Code Point (DSCP) support |
| Compliant Standards | IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.1ab (LLDP) |
| RAM | 128 MB |
| Flash Memory | 64 MB |
| Status Indicators | Port status, port transmission speed, port duplex mode, power, system, link/activity |
| Interfaces | 48 x 100Base-TX RJ-45 ¦ 2 x SFP uplink ¦ 2 x 1000Base-T RJ-45 uplink |
| Power Device | Internal power supply |
| Voltage Required | AC 120/230 V (50/60 Hz) |
| Power Consumption Operational | 30.6 Watt |
| Features | Redundant Power System (RPS) connector |
| MTBF | 623,000 hours |
| Compliant Standards | CISPR 22 Class A, BSMI CNS 13438 Class A, CISPR 24, EN 61000-3-2, EN 61000-3-3, EN55024, EN55022 Class A, AS/NZS 60950-1, ICES-003 Class A, FCC CFR47 Part 15, UL 60950-1 Second Edition, Directive 2004/108/EC, CSA C22.2 No. 60950-1 Second Edition, EN 60950-1 Second Edition, IEC 60950-1 Second Edition, Directive 2006/95/EC, VCCI Class A, KN24, KN22 Class A, EN 300386, RoHS 2011/65/EU |
| Software Included | Cisco LAN Base software |
| Width | 17.7 in |
| Depth | 9.5 in |
| Height | 1.7 in |
| Weight | 7.94 lbs |
| Min Operating Temperature | 23 °F |
| Max Operating Temperature | 104 °F |
| Humidity Range Operating | 10 - 95% (non-condensing) |
| Min Storage Temperature | -13 °F |
| Max Storage Temperature | 158 °F |
| Humidity Range Storage | 10 - 95% (non-condensing) |
