Cisco

WS-C2960S-48FPD-L Cisco Catalyst 2960S Network Switch (New)

Write a Review
Ask Questions
WS-C2960S-48FPD-L Cisco Catalyst 2960S Network Switch (New)

WS-C2960S-48FPD-L Cisco Catalyst 2960S Network Switch (New)

$1,973.00
  • SKU: WS-C2960S-48FPD-L
  • UPC: 882658337437
  • MPN: WS-C2960S-48FPD-L
  • Condition: New
  • Availability: Limited Stock Available
Availability: Limited Stock Available
In Stock & Ready To Ship!
Current Stock:Only left:
Description

Condition: NEW
Availability: End Of Life - Inventory May Be Limited

Cisco 2960S Ethernet Switch - 48 port switch - 48 x PoE Ports - 3 x Expansion Slots - 10/100/1000Base-T (WS-C2960S-48FPD-L)

Device Type Switch - 48 ports - managed
Enclosure Type Rack-mountable 1U
Subtype Gigabit Ethernet
Ports 48 x 10/100/1000 (PoE) + 2 x 10 Gigabit SFP+
Power Over Ethernet (PoE) PoE
Performance Switching capacity: 176 Gbps ¦ Forwarding performance (64-byte packet size): 101.2 Mpps
MAC Address Table Size 8K entries
Remote Management Protocol SNMP 1, SNMP 2, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, SNMP 2c, HTTP, HTTPS, TFTP, SSH
Encryption Algorithm SSL
Authentication Method Secure Shell (SSH), RADIUS, TACACS+
Features Layer 2 switching, auto-sensing per device, dynamic IP address assignment, power over Ethernet (PoE), auto-negotiation, BOOTP support, ARP support, load balancing, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, Syslog support, DiffServ support, Broadcast Storm Control, IPv6 support, Multicast Storm Control, Unicast Storm Control, Rapid Spanning Tree Protocol (RSTP) support, Multiple Spanning Tree Protocol (MSTP) support, DHCP snooping, Dynamic Trunking Protocol (DTP) support, Port Aggregation Protocol (PAgP) support, Access Control List (ACL) support, Quality of Service (QoS), PoE+, Link Aggregation Control Protocol (LACP), Port Security, MAC Address Notification, Remote Switch Port Analyzer (RSPAN)
Compliant Standards IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3af, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.3ah, IEEE 802.1ab (LLDP), IEEE 802.3at
RAM 128 MB
Flash Memory 64 MB flash
Status Indicators Port status, port transmission speed, port duplex mode, power, system, link/activity
Interfaces 48 x 10Base-T/100Base-TX/1000Base-T - RJ-45 PoE ¦ 1 x USB Type A ¦ 1 x console - mini-USB Type B management ¦ 1 x console - RJ-45 management ¦ 1 x 10Base-T/100Base-TX - RJ-45 management ¦ 2 x SFP+
Expansion Slots 1 (total) / 1 (free) x Stacking Module slot
Power Device Internal power supply
Voltage Required AC 120/230 V (50/60 Hz)
Power Consumption Operational 81 Watt
Rack Mounting Kit Optional
MTBF 183,498 hours
Compliant Standards TUV GS, CISPR 22 Class A, GOST, BSMI CNS 13438 Class A, CISPR 24, NOM, VCCI Class A ITE, EN55024, CB, EMC, MIC, IEC 60950-1, EN 60950-1, UL 60950-1 Second Edition, RoHS, CSA C22.2 No. 60950-1, FCC Part 15 B Class A
Software Included Cisco IOS LAN Base
Width 17.5 in
Depth 15.2 in
Height 1.8 in
Weight 13.01 lbs
Min Operating Temperature 23 °F
Max Operating Temperature 104 °F
Humidity Range Operating 10 - 95% (non-condensing)
Min Storage Temperature -13 °F
Max Storage Temperature 158 °F
Humidity Range Storage 10 - 95% (non-condensing)

Related Products

Recently Viewed