AIR-CT8540-1K-K9 Cisco 8540 Wireless Controller (New)

Cisco

Write a Review
SKU:
AIR-CT8540-1K-K9
Condition:
New
Availability:
Contact For Price
Add to Quote

Product Overview

Condition: NEW
Availability: Contact For Price And Availability

Cisco 8540 Wireless Controller - Network management device - 1000 wireless access points - 10 GigE - 2U - rack-mountable (AIR-CT8540-1K-K9)

The Cisco 8540 Wireless Controller provides centralized control, management, and troubleshooting for high-scale deployments in service provider and large campus deployments. It offers flexibility to support multiple deployment modes in the same controller: for example, centralized mode for campus, Cisco FlexConnect mode for lean branches managed over the WAN, and mesh (bridge) mode for deployments where full Ethernet cabling is unavailable. As a component of the Cisco Unified Wireless Network, this controller provides real-time communications between Cisco Aironet access points, the Cisco Prime Infrastructure, and the Cisco Mobility Services Engine, and is interoperable with other Cisco controllers.

General
Device Type Network management device
Height (Rack Units) 2U
Width 19 in
Depth 30.2 in
Height 3.4 in
Weight 43.87 lbs
Processor / Memory / Storage
Processors Installed 1 x Intel Xeon 2.5 GHz
RAM 64 GB SDRAM DIMM 288-pin
Hard Drive SSD hot-swap 240 GB x 2 - SATA 6Gb/s - 2.5"
RAID Level RAID 0, RAID 1, RAID 5, RAID 6
Networking
Form Factor Rack-mountable
Connectivity Technology Wired
Data Link Protocol 10 Gigabit Ethernet
Network / Transport Protocol TCP/IP, UDP/IP, ICMP/IP, IPSec, ARP, BOOTP, DHCP, Bonjour
Routing Protocol CIDR
Remote Management Protocol SNMP 1, RMON, Telnet, SNMP 3, SNMP 2c, HTTP, HTTPS, TFTP, SSH, CLI
Performance Throughput: 40 Gbps
Capacity Manageable access points: up to 6000 ¦ Virtual interfaces (VLANs): 4096 ¦ Wireless clients: 64000
Features VLAN support, Syslog support, IPv6 support, Deep Packet Inspection (DPI), SNTP support, Mesh networking, Wi-Fi Multimedia (WMM) support, Trusted Platform Module (TPM), CleanAir technology, CAPWAP support, rogue access point detection, Cisco VideoStream technology, Cisco FlexConnect
Encryption Algorithm DES, Triple DES, RSA, RC4, MD5, AES, IKE, SSL, SHA-1, TLS 1.0, TKIP, WPA, WPA2, PKI, AES-CCMP, AES-CCM, AES-CBC, TLS 1.1, WEP
Authentication Method RADIUS, X.509 certificates, TACACS, Extensible Authentication Protocol (EAP)
Compliant Standards IEEE 802.3, IEEE 802.3u, IEEE 802.1Q, IEEE 802.11b, IEEE 802.11a, IEEE 802.11d, IEEE 802.11g, IEEE 802.1x, IEEE 802.11i, IEEE 802.11h, IEEE 802.11e, IEEE 802.1ae, IEEE 802.11n, IEEE 802.11k, IEEE 802.1AX, IEEE 802.11ac, IEEE 802.11w, IEEE 802.11r, IEEE 802.11u
Expansion / Connectivity
Expansion Bays 2 (total) / 2 (free) x hot-swap - 2.5"
Interfaces 1 x serial - RJ-45 ¦ 4 x 10Gb Ethernet - SFP+ ¦ 3 x 1000Base-T (management) - RJ-45 ¦ 2 x USB 3.0 - Type A ¦ 1 x VGA
Miscellaneous
Included Accessories Rack mount kit, 32 GB SD card
Compliant Standards CISPR 22 Class A, BSMI CNS 13438 Class A, CISPR 24, EN 61000-3-2, EN 61000-3-3, EN55024, EN55022 Class A, AS/NZS 60950-1, ICES-003 Class A, UL 60950-1 Second Edition, GB 4943, Directive 2004/108/EC, CSA C22.2 No. 60950-1 Second Edition, EN 60950-1 Second Edition, IEC 60950-1 Second Edition, Directive 2006/95/EC, VCCI Class A, KN24, KN22 Class A, EN 300386
Power
Power Device Internal power supply - hot-plug
Installed Qty 2
Max Supported Qty 2
Power Redundancy Yes
Environmental Parameters
Min Operating Temperature 41 °F
Max Operating Temperature 95 °F
Humidity Range Operating 10 - 90% (non-condensing)