Condition: NEW
Manufacturer Part #: C9200-48P-E

Cisco Catalyst 9200 Modular Uplink Switch with base Network Essentials license - stackable 48 ports full PoE+ switch (48 x 1Gig PoE+ ports; supports 4 x 1G and 4 x 10G network modules for uplink ports) - has 2 FRU power supply module slots (ships with 1 default power supply); the default primary AC power supply is PWR-C6-1KWAC - PoE budget of 740 watt using single primary PSU - there are 2 internal fixed fans - supports the StackWise-160 stacking option

Cisco 9200 Series switches provide security features that protect the integrity of the hardware as well as the software and all data that flows through the switch. It provides flexible downlink options with data, PoE+, UPOE, UPOE with mGig for Wi-Fi 6/6E, as well as open APIs of Cisco IOS XE and programmability of the UADP ASIC technology.

With full PoE+ capability, power and fan redundancy, stacking bandwidth up to 160 Gbps, modular uplinks, Layer 3 feature support, and cold patching, Catalyst 9200 Series switches are the industry's unparalleled solution with differentiated resiliency and progressive architecture for cost-effective branch-office access.

Device Type: Switch - 48 ports - smart - stackable

Enclosure Type: Rack-mountable

Subtype: Gigabit Ethernet

Ports: 48 x 10/100/1000 (PoE+) + 4 x 10Gb Ethernet SFP+

Power Over Ethernet (PoE): PoE+

PoE Budget: 740 W

Performance: Wireless bandwidth: up to 48 Gbps | Switching capacity: 176 Gbps | Forwarding rate: 261.9 Mpps

Capacity: Virtual networks: 4 | MAC addresses: 32000 | IPv4 routes: 14000 | Indirect IPv4 routes: 4000 | Direct IPv4 routes: 10000 | IPv4 routing table entries: 4000 | IPv6 routing table entries: 2000 | Multicast scale: 1000 | ACL scale entries: 16000 | Packet buffer size: 6 MB | Flexible NetFlow entries: 16000 | VLAN IDs: 1000

Jumbo Frame Support: 9198 bytes

Routing Protocol: OSPF, RIP, EIGRP, VRRP, PIM-SM, policy-based routing (PBR)

Remote Management Protocol: NETCONF, RESTCONF

Features: Quality of Service (QoS), Remote Switch Port Analyzer (RSPAN), Flexible NetFlow (FNF), MACsec support, Control plane protection (CoPP), Sampled NetFlow, Switched Port Analyzer (SPAN), Embedded Event Manager (EEM), First Hop Security (FHS), DNA support

Compliant Standards: IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3af, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.3at, IEEE 802.3bz

Power: AC 120/230 V

Power Redundancy: Optional

Dimensions (WxDxH): 17.5 in x 1.7 in x 13.8 in

Weight: 12.13 lbs

System Requirements: Cisco IOS XE 16.9.2 or later