Product Overview
Condition: NEW
Manufacturer Part #: C9200-48PL-E
Cisco Catalyst 9200 Modular Uplink Switch with base Network Essentials license - stackable 48 ports partial PoE+ switch (48 x 1Gig PoE+ ports with partial PoE support; supports 4 x 1G and 4 x 10G network modules for uplink ports) - has 2 FRU power supply module slots (ships with 1 default power supply); the default primary AC power supply is PWR-C6-600WAC - PoE budget of 370 watt using single primary PSU - there are 2 internal fixed fans - supports the StackWise-160 stacking option
Cisco 9200 Series switches provide security features that protect the integrity of the hardware as well as the software and all data that flows through the switch. It provides flexible downlink options with data, PoE+, UPOE, UPOE with mGig for Wi-Fi 6/6E, as well as open APIs of Cisco IOS XE and programmability of the UADP ASIC technology.
With full PoE+ capability, power and fan redundancy, stacking bandwidth up to 160 Gbps, modular uplinks, Layer 3 feature support, and cold patching, Catalyst 9200 Series switches are the industry's unparalleled solution with differentiated resiliency and progressive architecture for cost-effective branch-office access.
Device Type: Switch - 48 ports - L3 - stackable
Enclosure Type: Rack-mountable
Subtype: Gigabit Ethernet
Ports: 48 x 10/100/1000 (PoE+)
Power Over Ethernet (PoE): PoE+
Performance: Stacking bandwidth: 160 Gbps | Switching capacity: 176 Gbps | Switching capacity with stacking: 336 Gbps | Forwarding rate: 130.95 Mpps | Forwarding rate with stacking: 250 Mpps
Capacity: IPv4 routes: 14000 | Indirect IPv4 routes: 4000 | Direct IPv4 routes: 10000 | IPv4 routing table entries: 4000 | IPv6 routing table entries: 2000 | Multicast scale: 1000 | ACL scale entries: 16000 | Packet buffer size: 6 MB | Flexible NetFlow entries: 16000 | VLAN IDs: 1000
MAC Address Table Size: 32000 entries
Jumbo Frame Support: 9198 bytes
Routing Protocol: OSPF, RIP-1, RIP-2, EIGRP, VRRP, PIM-SM, EIGRP for IPv6, PIM-SSM, policy-based routing (PBR), RIPng, MSTP
Remote Management Protocol: SNMP 1, RMON 1, RMON 2, SNMP 3, SNMP 2c, CLI, NETCONF, RESTCONF
Features: Quality of Service (QoS), Cisco StackWise Technology, Rapid Per-VLAN Spanning Tree Plus (PVRST+), Shaped Round Robin (SRR), PXE support, Remote Switch Port Analyzer (RSPAN), NetFlow, Energy Efficient Ethernet, Management Information Base (MIB), Class of Service (CoS), Flexible NetFlow (FNF), 802.1x authentication, DiffServ Code Point (DSCP) support, MACsec support, 6MB packet buffer, Control plane protection (CoPP), Switched Port Analyzer (SPAN), Embedded Event Manager (EEM), Protocol Independent Multicast (PIM), First Hop Security (FHS), PVLAN support, Committed Information Rate (CIR)
Compliant Standards: IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3af, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.3at, IEEE 802.3bz
Power: AC 100-240 V (50/60 Hz)
Power Redundancy: Optional
Dimensions (WxDxH): 17.5 in x 1.7 in x 13.8 in
Weight: 12.13 lbs
