Condition: NEW
Manufacturer Part #: C9200L-48P-4X-A

Cisco Catalyst 9200L Fixed Uplink Switch with base Network Advantage license - stackable 48 ports full PoE+ switch (48 x 1Gig PoE+ ports with 4 x 10G SFP+ fixed uplinks) - has 2 FRU power supply module slots (ships with 1 default power supply); the default primary AC power supply is PWR-C5-1KWAC - PoE budget of 740 watt using single primary PSU - there are 2 internal fixed fans - supports the StackWise-80 stacking option

Cisco 9200 Series switches provide security features that protect the integrity of the hardware as well as the software and all data that flows through the switch. It provides flexible downlink options with data, PoE+, UPOE, UPOE with mGig for Wi-Fi 6/6E, as well as open APIs of Cisco IOS XE and programmability of the UADP ASIC technology.

With full PoE+ capability, power and fan redundancy, stacking bandwidth up to 160 Gbps, modular uplinks, Layer 3 feature support, and cold patching, Catalyst 9200 Series switches are the industry's unparalleled solution with differentiated resiliency and progressive architecture for cost-effective branch-office access.

Device Type: Switch - 48 ports - L3 - managed - stackable

Enclosure Type: Rack-mountable

Subtype: Gigabit Ethernet

Ports: 48 x 10/100/1000 (PoE+) + 4 x 10 Gigabit SFP+ (uplink)

Power Over Ethernet (PoE): PoE+

PoE Budget: 1440 W

Performance: Stacking bandwidth: 80 Gbps | Switching capacity: 176 Gbps | Forwarding rate: 261.9 Mpps

Capacity: Virtual networks: 1 | IPv4 routes: 11000 | IPv4 routing table entries: 3000 | IPv6 routing table entries: 1500 | Multicast scale: 1000 | ACL scale entries: 1500 | FNF entries: 16000 | VLANs supported: 1024 | Switched virtual interfaces (SVIs): 512 | QoS hardware queues per port: 8

MAC Address Table Size: 16000 entries

Jumbo Frame Support: 9198 bytes

Routing Protocol: OSPF, RIP, IS-IS, RIP-1, RIP-2, EIGRP, HSRP, VRRP, PIM-SM, EIGRP for IPv6, OSPFv3, PIM-SSM, MSDP, policy-based routing (PBR), RIPng, MSTP

Remote Management Protocol: SNMP 1, RMON 1, RMON 2, SNMP 3, SNMP 2c, CLI, NETCONF, RESTCONF

Features: Quality of Service (QoS), Cisco StackWise Technology, Rapid Per-VLAN Spanning Tree Plus (PVRST+), Shaped Round Robin (SRR), PXE support, Remote Switch Port Analyzer (RSPAN), NetFlow, Energy Efficient Ethernet, Management Information Base (MIB), Class of Service (CoS), Flexible NetFlow (FNF), 802.1x authentication, DiffServ Code Point (DSCP) support, MACsec support, 6MB packet buffer, Control plane protection (CoPP), Switched Port Analyzer (SPAN), Embedded Event Manager (EEM), Protocol Independent Multicast (PIM), First Hop Security (FHS), PVLAN support, Committed Information Rate (CIR)

Compliant Standards: IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3af, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.1ab (LLDP), IEEE 802.3at, IEEE 802.3bz

Power: AC 120/230 V (50-60 Hz)

Power Redundancy: Optional

Dimensions (WxDxH): 17.5 in x 11.3 in x 1.7 in

Weight: 12.13 lbs