Cisco

SG550X-24MP-K9-NA Cisco SG550X-24MP Stackable Managed Switch, 24 Gigabit PoE+ and 4 10Gig Ethernet Ports, 382w PoE (New)

Write a Review
Ask Questions
SG550X-24MP-K9-NA Cisco SG550X-24MP Stackable Managed Switch, 24 Gigabit PoE+ and 4 10Gig Ethernet Ports, 382w PoE (New)

SG550X-24MP-K9-NA Cisco SG550X-24MP Stackable Managed Switch, 24 Gigabit PoE+ and 4 10Gig Ethernet Ports, 382w PoE (New)

$1,493.00
  • SKU: SG550X-24MP-K9-NA
  • UPC: 882658808470
  • MPN: SG550X-24MP-K9-NA
  • Condition: New
  • Availability: Limited Stock Available
Availability: Limited Stock Available
In Stock & Ready To Ship!
Current Stock:Only left:
Description

Condition: NEW
Availability: End Of Life - Inventory May Be Limited

Cisco Small Business 500 Stackable Managed Switch - L3 - 24 x 10/100/1000 (PoE+) + 2 x combo 10GBase-T + 2 x SFP+ - PoE+ (382 W) - rack-mountable (SG550X-24MP-K9-NA)

The Cisco 550X Series is designed to deliver hardware redundancy at the lowest incremental cost. If power to the switch is lost (through loss of AC power or power supply failure), the switch will automatically, and instantaneously, obtain its power from the RPS. This switchover occurs so quickly that there is no loss in traffic or reboot of the device. Cooling fan redundancy is delivered through preinstalled N+1 configuration. A switch can fully support all its capabilities for the life of the product with only N fans. If one of the fans fails, the spare fan automatically takes over, without causing any downtime.

The Cisco 550X Series provides an additional layer of resiliency with support for the Virtual Router Redundancy Protocol (VRRP). VRRP lets you extend the same resiliency that stacking provides for individual switches to complete network domains. By running VRRP between two stacks, you can instantly cut over from one stack to another in the event of a problem and continue operating even after a failure.

Device Type Switch - 24 ports - L3 - managed - stackable
Enclosure Type Rack-mountable 1U
Subtype Gigabit Ethernet
Ports 24 x 10/100/1000 (PoE+) + 2 x combo 10GBase-T + 2 x SFP+
Power Over Ethernet (PoE) PoE+
PoE Budget 382 W
Performance Forwarding performance (64-byte packet size): 95.23 Mpps ¦ Switching capacity: 128 Gbps
MAC Address Table Size 16K entries
Jumbo Frame Support 9216 bytes
Routing Protocol Static IP routing
Remote Management Protocol SNMP 1, SNMP 3, SNMP 2c, HTTP, HTTPS
Features Flow control, layer 2 switching, VLAN support, IPv6 support, Spanning Tree Protocol (STP) support, Rapid Spanning Tree Protocol (RSTP) support, Multiple Spanning Tree Protocol (MSTP) support, Access Control List (ACL) support, Quality of Service (QoS), reset button, LACP support, Energy Efficient Ethernet, Dynamic VLAN Support (GVRP), 1.5MB packet buffer
Compliant Standards IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3af, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.3at, IEEE 802.3az
RAM 256 MB
Flash Memory 32 MB
Status Indicators Port transmission speed, system, PoE, link/activity
Interfaces 24 x 1000Base-T RJ-45 60 W ¦ 2 x SFP+ ¦ 2 x 10GBase-T ¦ 1 x 1000Base-T RJ-45 management
Power Device Internal power supply
Voltage Required AC 120/230 V (50/60 Hz)
Cables Included 1 x serial cable
Rack Mounting Kit Included
MTBF 178,798 hours
Compliant Standards UL 60950, FCC Part 15 A, CSA 22.2
Localization North America
Dimensions & Weight
Width 17.3 in
Depth 13.8 in
Height 1.7 in
Weight 11.75 lbs
Environmental Parameters
Min Operating Temperature 32 °F
Max Operating Temperature 122 °F
Humidity Range Operating 10 - 90% (non-condensing)
Min Storage Temperature -4 °F
Max Storage Temperature 158 °F
Humidity Range Storage 10 - 90% (non-condensing)

Related Products

Recently Viewed