C9800-80-K9 Cisco Catalyst 9800-80 Wireless Controller (New)


Write a Review
MSRP: $80,280.00
(You save $80,280.00 )
Inventory Available - May Be Limited

Product Overview

Condition: NEW
Availability: Inventory Available - But May Be Limited

Cisco Catalyst 9800-80 Wireless Controller - Network management device - 8 ports - fixed uplinks which can be used as: 8 x 10G SFP+, or 6 x 10G plus 2x 1G - accommodates up to 6,000 access points and 64,000 clients - Up to 80 Gbps throughput - Aironet 802.11ac Wave 1 and Wave 2 access points, Cisco Catalyst 9100 802.11ax access points - rack-mountable (C9800-80-K9)

Built from the ground up for intent-based networking and Cisco DNA, Cisco Catalyst 9800 Series Wireless Controllers are Cisco IOS XE based and integrate the RF excellence of Cisco Aironet access points, creating a best-in-class wireless experience for your evolving and growing organization. The 9800 Series is built on an open and programmable architecture with built-in security, streaming telemetry, and rich analytics.

The Cisco Catalyst 9800 Series Wireless Controllers are built on the three pillars of network excellence--always on, secure, and deployed anywhere--which strengthen the network by providing the best wireless experience without compromise while saving time and money.

The Cisco Catalyst 9800-80 is a modular wireless controller with optional 100 Gigabit Ethernet (G) modular uplinks and seamless software updates for large enterprises and campuses. It is feature rich and enterprise ready to power your business-critical operations and transform end-customer experiences.

Device Type Network management device
Height (Rack Units) 2U
Width 17.3 in
Depth 20.5 in
Height 3.5 in
Weight 31.5 lbs
Processor / Memory / Storage
Hard Drive SSD 240 GB
Form Factor Rack-mountable
Ports Qty 8
Connectivity Technology Wired
Data Link Protocol Gigabit Ethernet, IEEE 802.11b, IEEE 802.11a, IEEE 802.11g, 10 Gigabit Ethernet, IEEE 802.11n, IEEE 802.11ac Wave 2, IEEE 802.11ac Wave 1
Network / Transport Protocol TCP/IP, UDP/IP, ICMP/IP, IPSec, ARP, BOOTP, DHCP, HTTP, HTTPs, IPv4, IPv6
Routing Protocol CIDR
Remote Management Protocol SNMP 1, RMON, Telnet, SNMP 3, SNMP 2c, HTTP, HTTPS, TFTP, SSH, CLI, NETCONF
Performance Throughput: 80 Gbps
Capacity Maximum number of access points: 6000 ¦ Maximum number of clients: 64000 ¦ Wireless LANs: 4096 ¦ VLANs supported: 4096 ¦ Site tags: 6000 ¦ Flex APs per site: 100 ¦ Policy tags: 6000 ¦ RF tags: 6000 ¦ RF profiles: 12000 ¦ Policy profiles: 1000 ¦ Flex profiles: 6000
Status Indicators Port status, power, system, alarm, SSD activity
Features Syslog support, SNTP support, Wi-Fi Multimedia (WMM) support, Quality of Service (QoS), CAPWAP support, Management Information Base (MIB), Flexible NetFlow (FNF), 802.1x authentication, Link Aggregation, Management Information Base (MIB) II, Authentication, Authorization and Accounting (AAA), Network-Based Application Recognition (NBAR) 2, Point-to-Point Protocol (PPP)
Encryption Algorithm DES, Triple DES, MD5, AES, 128-bit WEP, SSL, TLS 1.0, WPA2, PKI, DTLS, TLS 1.2, ESP, CRL, CCM, CCMP
Authentication Method Secure Shell (SSH), RADIUS, TACACS, Extensible Authentication Protocol (EAP)
Compliant Standards IEEE 802.3, IEEE 802.3u, IEEE 802.1Q, IEEE 802.11d, IEEE 802.1x, X.509, IEEE 802.11i, IEEE 802.11h, IEEE 802.11e, IEEE 802.1ae, IEEE 802.11k, IEEE 802.1AX, IEEE 802.11w, IEEE 802.11r, IEEE 802.11u
Expansion / Connectivity
Expansion Bays 1 (total) / 0 (free) x internal
Expansion Slots 1 (total) / 1 (free) x expansion slot
Interfaces 6 x 10GBase-X - SFP+ ¦ 2 x 1000Base-X/10GBase-X - SFP+ ¦ 1 x 1000Base-T (management) - RJ-45 ¦ 1 x redundancy - RJ-45 ¦ 1 x redundancy - SFP (mini-GBIC) ¦ 2 x USB 3.0 - Type A ¦ 1 x console - RJ-45 ¦ 1 x console - mini-USB
Included Accessories Expansion Module Blank
Compliant Standards VCCI, CISPR 24, EN 61000-3-2, EN55022, ICES-003, EN 61000-3-3, EN55024, CISPR 22, EN50082-1, EN 61000-6-1, AS/NZS 60950-1, FCC CFR47 Part 15, HMAC, AS/NZS CISPR 22, CNS 13438, EN 300 386, KN32, UL/CSA60950-1, IEC/EN 61000-4-3, IEC/EN 61000-4-4, IEC/EN 61000-4-5, IEC/EN 61000-4-6, IEC/EN 61000-4-8, IEC/EN 61000-4-11, IEC/EN 61000-4-2, EN 55032, IEC/EN 60950-1, CAN/CSA-C22.2 No. 60950-1
Power Device Internal power supply - hot-plug
Max Supported Qty 2
Power Redundancy Optional
Software / System Requirements
OS Required Cisco IOS XE 16.10.1 or later
Environmental Parameters
Min Operating Temperature 41 °F
Max Operating Temperature 104 °F
Humidity Range Operating 5 - 85% (non-condensing)